Wall Bracket for Pergola
Viewing 3 posts - 1 through 3 (of 3 total)
- AuthorPosts
- 2025-02-07 at 20:23 #17280
nicoloParticipantHi Everyone,
I hope you all are doing good. It has been a long time since I posted on the website. I have a question about
a wall bracket for an exterior wall that would hold up a Pergola right above the garage door. I tried to integrate
4 x 4 wood columns with 4 x 4 members and a 4 x 4 bottom brace at 45 degrees, but I can not rotate the bracket
the right way to add it to the exterior wall.
If you folks have any ideas that would be great. Take care and thank you. Nicolo Bruno
2025-02-13 at 08:24 #17288louisacoModeratorYou can use an angled member to represent the bracket.
go to insert>members>advanced members
enter the slope of the member then select it>right click>elevate it to the height of the bracket.2025-02-13 at 09:27 #17289nicoloParticipantThank you Louis I will give it a try and see if I can get it to work, Nicolo Bruno.
- AuthorPosts
Viewing 3 posts - 1 through 3 (of 3 total)